Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Oil Filter on a Toyota Yaris

Model: Toyota Yaris Xp130 - Years 2011-2019
Part: Oil filter

How to remove the oil filter on a Toyota Yaris? This is a simple operation if you follow the correct steps. Lift the car using a column lift or jack. After removing the cover panel (if present), use a socket spanner to unscrew the oil filter holder. Allow the oil to drain into a container for disposal. Remove the dirty and worn filter from the metal container; clean the container and insert a new filter. Screw the filter holder back into its designated housing using the appropriate spanner and lower the car once the job is complete.

Updated on 4 March 2026 by ScegliAuto

Video tutorial

Related tutorials

Toyota Yaris 1.3 VVT-i engine oil replacement
Toyota Yaris 1.3 VVT-i engine oil replacement
Toyota Yaris (2005-2011 / Xp90) In this video tutorial we will see how to remove and replace the engine oil of a Toyota Yaris 1.3 VVT-i. First of all we lift the car and go to remov…
How to Remove the Fuel Filter on a Toyota Yaris
How to Remove the Fuel Filter on a Toyota Yaris
Toyota Yaris (2005-2011 / Xp90) Follow these steps to remove the fuel filter on a Toyota Yaris: lift the car on a column lift or a suitable jack (if necessary), locate the fuel filt…
How do I change the Toyota Yaris oil and oil filter?
How do I change the Toyota Yaris oil and oil filter?
Toyota Yaris (1999-2005 / Xp10) In order to change the Toyota Yaris engine oil, you will need to access the underside of the car: here you will find the oil drain plug. Opening it w…

Reset Tyre Pressure Light Toyota Yaris 2016

Due to advancements in onboard electronics, many vehicles are equipped with various sensors that monitor several operating parameters, including tyre pressure. Even if the pressure is correct, the warning light may sometimes illuminate on the dashboard. First, check with a gauge that the pressure in all 4 tyres matches the manufacturer's specifications. For the 2016 Toyota Yaris, the values are as follows: Front: 2.2 bar for T-type tyres, 2.3 for H-type, 2.4 for W-type. Rear: 2.2 bar for all tyre types. To reset the pressure light, turn on the ignition with the key, locate the reset button under the steering column. Press it for 3 seconds, and the light will flash 3 times before turning off. Remove the key from the ignition and start the vehicle.

Watch the video!


by ScegliAuto

More videos