Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Front Headlight Bulb in a Toyota Auris

Model: Toyota Auris E150 - Years 2007-2012
Part: Headlight bulb

To perform this simple task, first disconnect the battery to protect any sensitive circuits. Then, to access the back of the headlight, lift the windscreen washer fluid funnel. Now, remove the covers at the back of the headlight to replace the necessary bulbs. Extract the bulb and disconnect the connector that powers it. Finally, reverse the steps for refitting.

Updated on 26 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Replace the Toyota Auris headlight bulb
Toyota Auris (2012-2018 / E180) Today we are going to see how to replace the headlight bulb of a Toyota Auris. First of all, we open the front hood and we go to identify the interna…
How to replace the front headlight bulb of the Toyota Auris
How to replace the front headlight bulb of the Toyota Auris
Toyota Auris (2012-2018 / E180) Today's information will allow us to disassemble and replace the front headlight bulb of the Toyota Auris. First, we open the hood of the car and sta…
Toyota Auris headlight bulb replacement
Toyota Auris headlight bulb replacement
Toyota Auris (2012-2018 / E180) In today's video tutorial we will see the steps on how to disassemble and replace the Toyota Auris headlight bulb. First we open the bonnet of our ca…

Other guides you may be interested in

How to Replace the Front Headlamp Bulb on a Fiat Grande Punto

To replace the front headlamp bulb on a Fiat Grande Punto, first open the bonnet. Once done, access the rear of the headlamp where the bulb needs replacing (the bulb is of type H4). Locate the rubber cover that protects the electrical contacts and bulbs from water and moisture. Remove it by pulling on the tab. Now, pull the connector for the bulb's power supply and disconnect it from its position. At this point, push down on the top of the spring that holds the bulb in place, and you can extract the bulb from its housing. To fit the new bulb, follow the steps in reverse as shown in the images. The video also shows how to remove the position bulb, which is located just below the H4. After disconnecting the power supply, you can extract it along with the bulb holder by pressing the two tabs to release it and pulling. The bulb can then be removed from its position in the bulb holder.

Watch the video!


by ScegliAuto

More videos