Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Front Bumper of a Subaru Impreza

Model: Subaru Impreza MK 5 - Years 2016-2023
Part: Front bumper

Do you want to replace the front bumper of a Subaru Impreza? Follow this guide. Lift the bonnet and secure it. Using a socket wrench, unscrew the fastening bolts of the bumper located at the top as shown in the video. Once this is done, unscrew the screws of the splash guard located near the wheels, and finally remove the plastic pins/rivets at the bottom of the bumper. Remove the bumper from the vehicle body by hand. To proceed with the installation, position the bumper as shown in the video and tighten all screws around the splash guard and the perimeter.

Updated on 26 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Remove Subaru Impreza front bumper
Remove Subaru Impreza front bumper
Subaru Impreza (2011-2016 / MK 4) Let's see how the front bumper of the Subaru Impreza is removed. We lift the front bumper of the car, remove the tightening rivets placed in the uppe…
Where is the fuse box of the Subaru Impreza located?
Where is the fuse box of the Subaru Impreza located?
Subaru Impreza (2016-2023 / MK 5) In this new guide, we will help you easily locate the fuse box inside the cabin of your Subaru Impreza. First of all, enter the car and reach the dri…
How to replace the rear light bulb on a Subaru Impreza
How to replace the rear light bulb on a Subaru Impreza
Subaru Impreza (2007-2011 / MK 3) Before we begin, we will have to open the tailgate of our Subaru Impreza. So let's start by disengaging and moving the carpet placed near the rear li…

Other guides you may be interested in

How to Replace the Timing Belt on a Lancia Delta

How do you replace the timing belt on a Lancia Delta? Lift the car on a column lift. Open the bonnet, remove the engine soundproofing panel and the metal timing belt cover. Using a suitable spanner, loosen the tensioner pulley and slide the belt off its seat. After fitting the new belt, use the spanner to tension the tensioner pulley, tightening until the belt has the correct tension (as previously installed). Finally, check the tensioner and the belt itself, and tighten everything with a socket wrench.

Watch the video!


by ScegliAuto

More videos