Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Centre Console on a Renault Scenic

Model: Renault Scenic MK 2, Scenic 2 - Years 2003-2009
Part: Center console tunnel

Watch this video to learn how to remove the glove compartment from the rear cover of the centre console on a Renault Scenic. Use a plastic lever to pry at the edge of the side plastics as shown in the video. Once the plastics are removed, unscrew the screws located at the sides of the centre console with a suitable screwdriver, and disconnect all the power connectors. Remove the side rests from the glove compartment. Fit the new piece onto the centre cover and proceed with the assembly of the remaining parts, working in reverse order.

Updated on 2 March 2026 by ScegliAuto

Video tutorial

Related tutorials

Remove the gear knob on Renault Scenic
Remove the gear knob on Renault Scenic
Renault Scenic (2003-2009 / MK 2, Scenic 2) Let's see the disassembly of the knob mounted on the shift rod of a Renault Scenic. We enter the vehicle and begin the disassembly of the lower plast…
Replacement of the cabin air filter of the Renault Scenic
Replacement of the cabin air filter of the Renault Scenic
Renault Scenic (2009-2015 / MK III, Scenic 3, Scenic III, MK 3) To ensure a circulation of always clean air in the air conditioning system of the Renault Scenic, we must periodically replace the dedicated filter. …
How to Replace the Fan Resistor on a Renault Scenic
How to Replace the Fan Resistor on a Renault Scenic
Renault Scenic (2003-2009 / MK 2, Scenic 2) How to replace the fan resistor on a Renault Scenic? Let's see how to carry out the disassembly. Remove the plastic cover above the centre tunnel usi…

Timing Belt Replacement on Audi Q5

The timing belt on the Audi Q5 has reached its mileage limit, so what should you do? Let's go through the removal of the belts on the Q5. Open and lift the hood of the engine, then remove the engine soundproofing panel. Once these steps are completed, remove the plastic covers of the belts located on the left side of the engine. Loosen the second tensioner and slide the belt out of its seat. After installing the new belt, use a wrench to install the tensioner pulley, and tighten it until the belt has the correct tension (install both belts). Reinstall the covering plastics. Start and test the Audi Q5 engine.

Watch the video!


by ScegliAuto

More videos