Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Bulbs on a Nissan Almera Rear Light

Model: Nissan Almera MK 2, N16 - Years 2000-2008
Part: Light bulb

Do you want to change the damaged bulb of a rear light on a Nissan Almera? Follow this video carefully to proceed correctly. Open the boot, remove the fabric side covering, and detach the plastic rivets on the covering. Unscrew the retaining bolts of the rear light using a socket spanner. Once the light is free from the bolts, pull the rear light out of the metal housing, then disconnect the power cable. Place the stop light on a comfortable surface and replace all worn bulbs. To refit the rear light, position it in its housing and tighten all screws after reconnecting the lighting connector.

Updated on 26 February 2026 by ScegliAuto

Video tutorial

Related tutorials

How to replace the front headlight bulb of the Nissan Almera N16
How to replace the front headlight bulb of the Nissan Almera N16
Nissan Almera (2000-2008 / MK 2, N16) If one of the bulbs in the front headlight of your Nissan Almera N16 has suddenly stopped working and you want to find out how to replace it quickly …
Replacement rear bulbs on Nissan Almera
Replacement rear bulbs on Nissan Almera
Nissan Almera (2000-2008 / MK 2, N16) Open the tailgate of the trunk and notice that on the side, behind each rear light, there is a hatch in the inner sheet of the trunk itself. Open it …
How to replace the tail lights on the Nissan Almera?
How to replace the tail lights on the Nissan Almera?
Nissan Almera (2000-2008 / MK 2, N16) In this tutorial, we will see how to replace the rear lights on a Nissan Almera, a process that is extremely simple and quick. First, let's make sure…

How to Replace the Grille on BMW 3 Series

In this video, learn how to replace the grille located on the front bumper of a BMW 3 Series. Prepare to remove the plastic grille frame on both sides of the bumper using a plastic trim tool. Pry between the frame and the bumper until the clips on the inside release (remove the screws from the top of the bumper for better access). Once the clips are released, remove the grille from the bumper and install a new one. Reinstall the grille into the car's bumper by pressing it until it locks in place. Check the proper installation of the parts.

Watch the video!


by ScegliAuto

More videos