Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Remove the Front Door Panel on Jeep Renegade

Model: Jeep Renegade BU, 520, MK 1 - Years 2014-2024
Part: Door trim panel

How to remove the front door panel on a Jeep Renegade? Follow these steps: before starting the disassembly, disconnect the battery terminals located in the engine compartment. Begin disassembly: using a lever, remove the switch panel located on the door handle, then use a screwdriver to unscrew the securing screws located there. Once all screws are removed, detach the plastic clips that secure the door. Remove the door panel by hand, disconnect the power connectors and the door release cable.

Updated on 1 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How to disassemble and replace the door panel of the Jeep Renegade
How to disassemble and replace the door panel of the Jeep Renegade
Jeep Renegade (2014-2024 / BU, 520, MK 1) Today's guide will show us how to disassemble and replace the front door panel of the Jeep Renegade. First, we open the door and begin to unscrew all…
Guide to replacing the speakers in the Jeep Renegade
Guide to replacing the speakers in the Jeep Renegade
Jeep Renegade (2014-2024 / BU, 520, MK 1) In this guide we will see the main instructions on how to disassemble and replace the front door speaker of the Jeep Renegade. First, we open the fro…
How to replace the speakers of the Jeep Renegade
How to replace the speakers of the Jeep Renegade
Jeep Renegade (2014-2024 / BU, 520, MK 1) In this video tutorial we will see how to replace the speakers of the Jeep Renegade, following these simple steps. First we open the front door and s…

Other guides you may be interested in

How to Remove the Engine Oil Filter of the Peugeot 308

How do you remove the engine oil filter of the Peugeot 308? Follow this guide to proceed with the replacement. Open the car door and pull up the engine compartment release lever located at the bottom left of the dashboard, then lift the front bonnet and secure it. Using a socket wrench, unscrew the large securing bolt of the container cap where the oil filter is located (engine compartment under the ventilation pipe). Drain the used oil from under the engine sump. Remove the worn oil filter and position a new one, ensuring it adheres well around the walls of the housing. Finally, refit the ventilation pipe and top up the engine oil. Close the front bonnet last.

Watch the video!


by ScegliAuto

More videos