Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Original Radio on a Honda CR-V

Model: Honda CR-V MK 4 - Years 2012-2017
Part: Car stereo

How do you remove the original radio on a Honda CR-V? First, use a plastic lever to remove the side cover of the radio (the air vents), then, with a screwdriver, unscrew the securing screws located on the sides (if present). After unscrewing the side screws (and disconnecting the clips) of the stereo, pull it out from its slot and remove it (disconnect the various power connectors at the back). To install the new stereo and the various removed parts, proceed in reverse order.

Updated on 3 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How to reset the "Service" light on a Honda CRV?
How to reset the "Service" light on a Honda CRV?
Honda CR-V (2023-2026 / MK 6, RS) To reset the "Service" light on a Honda CRV, turn on the dashboard without starting the engine. Use the controls on the steering wheel to access the …
How to reset honda crv radio
How to reset honda crv radio
Honda CR-V (2002-2007 / MK 2) Let's see what is the procedure to follow to reset the car radio: enter the passenger compartment and sit in the driver's seat, turn on the car radio…
How to reset the tire pressure sensor on a Honda CRV?
How to reset the tire pressure sensor on a Honda CRV?
Honda CR-V (2017-2022 / MK 5) To reset the tire pressure light on a Honda CRV, turn on the instrument panel without starting the engine. Use the central touchscreen to navigate to…

    Frequently Asked Questions

    • Cr V 2007-2012 - What is the enter code of the Honda CRV 2008? Read answer

How to Remove the CV Boot on Fiat Panda

Let’s see how to remove the boot from the joint on a Fiat Panda. After positioning your car on a column lift: raise it to a comfortable height to work on, loosen the wheel nuts (using a socket wrench or air drill) and remove the wheel. Begin unscrewing the brake disc bolts with a socket wrench. Remove the bolts located under the disc and completely detach the wheel hub. Pull the arm around the joint with your hands. Fit the new boot (after removing the old one) onto the constant velocity joint, then start reassembling all the parts in reverse order.

Watch the video!


by ScegliAuto

More videos