Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Steering Wheel on a Ford Fiesta

Model: Ford Fiesta Fiesta 5, MK 5, MK V - Years 2002-2008
Part: Steering wheel

How to remove the steering wheel on a Ford Fiesta with the airbag? In this video, see how to proceed. Before removing the steering wheel, disconnect the battery power connectors. Unscrew the screws/clips located at the back of the steering wheel cover with a screwdriver, then remove the airbag from the steering wheel. Once the airbag is removed, disconnect the power cables, remove the central steering wheel anchoring pin, and disconnect the power connectors. Finally, pull the steering wheel out of its housing. To reassemble everything, proceed in reverse order.

Updated on 12 March 2026 by ScegliAuto

This video is currently unavailable

Related tutorials

How to Remove the Airbag and Steering Wheel of a Ford Fiesta
How to Remove the Airbag and Steering Wheel of a Ford Fiesta
Ford Fiesta (1996-2002 / Be91, MK IV, MK 4, Fiesta 4) How do you remove the airbag and steering wheel of a Ford Fiesta? Before removing the steering wheel, disconnect the battery terminals located in the…
How to Remove the Steering Wheel Airbag on a Ford Fiesta
How to Remove the Steering Wheel Airbag on a Ford Fiesta
Ford Fiesta (2002-2008 / Fiesta 5, MK 5, MK V) How to remove the steering wheel airbag on a Ford Fiesta? Before removing the steering wheel, disconnect the battery terminals located in the engine …
How to remove airbags on Ford Fiesta
How to remove airbags on Ford Fiesta
Ford Fiesta (2008-2017 / MK VI, MK 6, Fiesta 6) We see the disassembly of the steering wheel airbag on a Ford Fiesta. We disconnect the cover plastics around the steering wheel (rear). Once the pla…

Other guides you may be interested in

How to Replace the Timing Belt on a Lancia Delta

How do you replace the timing belt on a Lancia Delta? Lift the car on a column lift. Open the bonnet, remove the engine soundproofing panel and the metal timing belt cover. Using a suitable spanner, loosen the tensioner pulley and slide the belt off its seat. After fitting the new belt, use the spanner to tension the tensioner pulley, tightening until the belt has the correct tension (as previously installed). Finally, check the tensioner and the belt itself, and tighten everything with a socket wrench.

Watch the video!


by ScegliAuto

More videos