Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Starter Motor on a Ford Focus

Model: Ford Focus Focus 2, MK 2 - Years 2004-2011
Part: Starter motor

Open the front bonnet and secure it; disconnect the starter motor power terminals using pliers or a screwdriver, depending on the pressure of the tabs. Use a socket spanner to undo the bolts securing the starter motor and remove it from the engine bay (disconnect the various wiring). Finally, fit the new starter motor by connecting the power cables and securing it with the associated bolts. Prepare to refit the engine to the vehicle along with all its components.

Updated on 6 March 2026 by ScegliAuto

Video tutorial

Related tutorials

Starter motor replacement on Ford Focus
Starter motor replacement on Ford Focus
Ford Focus (1998-2004 / MK 1) Replacing the starter motor of a Ford Focus? First of all we need to open the front hood and disconnect the battery clamps. We locate the starter mot…
How do you quickly replace the starter motor in a Ford Focus?
How do you quickly replace the starter motor in a Ford Focus?
Ford Focus (2018-2025 / MK 4) To replace the starter motor on a Ford Focus, start by lifting the hood and disconnecting the battery to avoid short circuits. Then, locate the start…
Removing the starter motor on Ford Focus
Removing the starter motor on Ford Focus
Ford Focus (1998-2004 / MK 1) Is the Ford Focus moped damaged? Let's see how it is removed from inside the engine compartment. We open the engine hood, disconnect the battery powe…

Other guides you may be interested in

    Frequently Asked Questions

    • Focus 2018-2025 - Where is the starter motor located on my Ford Focus 1.6 Tdci? Read answer

How to Remove the Armrest on the Centre Tunnel of a Volkswagen Golf

Let’s see how to remove the armrest on the centre tunnel of a Volkswagen Golf. Unscrew the securing screws (located inside the cup holder) with a screwdriver; use a plastic lever to pry off the cover at the rear of the centre tunnel (air vents). After removing the plastic cover, unscrew the securing bolts in the centre armrest using a socket wrench. Once this is done, pull off the tunnel and disconnect any power cables. Finally, insert the new part into the centre tunnel, and reassemble all components of the glove compartment as previously disassembled.

Watch the video!


by ScegliAuto

More videos