Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Knobs from a Fiat Panda

Model: Fiat Panda MK 3, 319 - Years 2012-2024
Part: Air conditioning

Let’s see in this simple video how to remove the air conditioning knobs from the Panda. Align all the knobs in one direction to make reassembly easier. Grip the plastic cover from both ends as shown in the video, pull until you hear a click, then pull to release the first knob. When you return the trim to its housing, you will see that the knob remains outside; now you can remove it. Repeat the same procedure for the second knob. Once you have finished removing all the knobs, perform the appropriate maintenance and reassemble everything.

Updated on 25 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Removing the front bumper Fiat Panda
Fiat Panda (1980-2003 / MK 1, 141) Hello everyone! In this tutorial you will be shown how to remove the front bumper on old model Fiat Panda. Although it is possible to remove the bump…
How to replace the rear windshield wiper of the Fiat Panda
How to replace the rear windshield wiper of the Fiat Panda
Fiat Panda (2003-2012 / 169, MK 2) If you are planning to replace the rear windshield wiper of your Fiat Panda second series by yourself, just read the following guide carefully and ap…
All the things you don't know about the Fiat Panda.
All the things you don't know about the Fiat Panda.
Fiat Panda (2012-2024 / MK 3, 319) The Fiat Panda is undoubtedly the most purchased car by families and not only. Sometimes it is thought that, given its size, the Panda does not have …

How to Install an Additional Horn on a Fiat Punto

It may happen that the original horn starts to produce a sound that is noticeably underwhelming; at this point, you can decide to install a pair of sounders connected in parallel with the original one to achieve a more assertive sound. The installation is very easy, but it is important to direct the sound output towards an air intake, so you need to shape a support bracket to fix it to the slam panel with a single bolt. Once secured, take the positive power from the fuse box using a 2.5 mm² cable, tapping into the purple wire directly under the relay while connecting the ground directly to the negative terminal of the battery.

Watch the video!


by ScegliAuto

More videos