Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Damaged Number Plate Bulb on Fiat 600

Model: Fiat Seicento MK 1 - Years 1998-2010
Part: License plate light

In this video, learn how to replace the damaged number plate bulb on a Fiat 600. Use a screwdriver or plastic lever to remove the number plate light unit located in the rear bumper of the car. Once the light unit is removed, extract the lamp holder with your hands, then disconnect the bulb from it. Fit the new bulb/LED (same size and voltage) into the lamp holder, then reassemble the light unit into the bodywork of the tailgate, pressing it until the clips lock automatically. Finally, test the correct operation of the previously installed bulb.

Updated on 28 February 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Rear Bumper on a Fiat 600
How to Remove the Rear Bumper on a Fiat 600
Fiat Seicento (1998-2010 / MK 1) How do you remove the rear bumper on a Fiat 600? Follow these steps: use a screwdriver or cordless drill to unscrew the securing bolts located at the…
Fiat 600 air conditioning compressor replacement
Fiat 600 air conditioning compressor replacement
Fiat Seicento (1998-2010 / MK 1) How to replace the compressor on your Fiat 600? The Seicento is not already set up to have air conditioning, so to put only the compressor on, you ha…
How to Replace the Ventilation Bulbs on a Fiat 600
How to Replace the Ventilation Bulbs on a Fiat 600
Fiat Seicento (1998-2010 / MK 1) How do you replace the lighting bulbs for the manual air conditioning knobs on a Fiat 600? In this video, see how to proceed: remove the central vent…

Other guides you may be interested in

How to Replace the Timing Belt on a Chevrolet Matiz

How to replace the timing belt on a Chevrolet Matiz. Open the bonnet and secure it, lift the car on a column lift (if necessary, remove the front wheel using a screwdriver to take off the right wheel arch liner). Use a fixed spanner to loosen the tensioner pulley and slide the belt off its seat. Use a socket spanner to undo the securing bolt of the tensioner pulley, then remove the water pump as shown in the video. Fit the new water pump, the tensioner, and the belt itself, tightening everything with the socket spanner. Finally, refit the rivets along with the wheel arch liner and reattach the wheel with the tyre to the vehicle.

Watch the video!


by ScegliAuto

More videos