Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Open the Bonnet of a BMW 1

Model: BMW Serie 1 E82, E81, E87, MK 1 - Years 2004-2013
Part: Body

Maintenance on a BMW 1? How do you open the front bonnet? This is a simple operation, let's see how to do it. Pull the lever located at the bottom left of the dashboard, then slightly lift the bonnet and pull the release lever. Lift the front bonnet and secure it with the prop rod. Top up the oil, coolant, and screenwash. To close the bonnet, remove the safety rod and let the bonnet drop down from a minimal height. Close the front bonnet and ensure it is properly secured to avoid issues while driving.

Updated on 20 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How to open the front hood of a BMW 1 Series
How to open the front hood of a BMW 1 Series
BMW Serie 1 (2004-2013 / E82, E81, E87, MK 1) Before we can begin, we will have to go and sit on the driver's seat of our BMW 1 Series. Let's start by pulling the front hood release lever towards…
How to open the engine hood of the BMW 1 Series
How to open the engine hood of the BMW 1 Series
BMW Serie 1 (2011-2019 / F20, F21, MK 2) Following these short and simple instructions, we will see how to open the hood of the BMW 1 Series. First, open the front door of the car, driver's …
How to open the bonnet of the BMW 1 Series
How to open the bonnet of the BMW 1 Series
BMW Serie 1 (2004-2013 / E82, E81, E87, MK 1) Let's go and see in this short and simple guide the procedure that will allow us to open the bonnet of the BMW 1 Series. First of all, get on board t…

How to Remove the CV Boot on Fiat Panda

Let’s see how to remove the boot from the joint on a Fiat Panda. After positioning your car on a column lift: raise it to a comfortable height to work on, loosen the wheel nuts (using a socket wrench or air drill) and remove the wheel. Begin unscrewing the brake disc bolts with a socket wrench. Remove the bolts located under the disc and completely detach the wheel hub. Pull the arm around the joint with your hands. Fit the new boot (after removing the old one) onto the constant velocity joint, then start reassembling all the parts in reverse order.

Watch the video!


by ScegliAuto

More videos