Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replace Remote Key Battery on BMW X1

Model: BMW X1 F48 - Years 2015-2022
Part: Key

Is the remote key battery dead? Let's see how to change it. Take the remote and slide the button to release the metal key. Once extracted, use a screwdriver to pry between the key cover and the plastic cap. Pry until the two pieces separate from the cover, remove the battery holder, replace the worn battery with a new one of the same size and voltage. Reassemble the cover and insert the metal key back into the remote. Check the remote's functionality with the buttons.

Updated on 15 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How do you replace the battery in the BMW X1 remote control?
How do you replace the battery in the BMW X1 remote control?
BMW X1 (2015-2022 / F48) The battery replacement of the BMW X1 remote control is carried out by removing the key, together with the special cover placed in the upper part of …
How to replace the battery of the BMW X1 key remote control
BMW X1 (2015-2022 / F48) Today we will see the information related to replacing the battery of the key remote of the BMW X1, but also on the models X2, X3, X4, X5 and X6. Fir…
How to replace the remote control battery of the BMW X1
How to replace the remote control battery of the BMW X1
BMW X1 (2015-2022 / F48) In this video we will see how to replace the remote control battery of the suv of the Bavarian house, or the BMW X1. Let's start by releasing the sma…

    Frequently Asked Questions

    • X1 2009-2015 - Doesn't recognize the key on BMW X1, why? Read answer

How to Remove the Headlight Bulbs on a Toyota Rav4

Let's see how to remove the headlight bulbs on a Toyota Rav4. Open the bonnet by pulling the lever located at the bottom right of the dashboard and secure it. Locate the inspection cap (if present) on the headlight and remove it (located at the rear of the headlight). At this point, you will find the bulbs with metal clips; pull the bulb holders out of the headlight and extract the damaged bulb using a screwdriver and pliers. Fit the new bulb (ensuring it is the correct type and size), insert the bulb holder back into the headlight housing, and close the headlight with the inspection cap. Test the lights to ensure they are functioning correctly.

Watch the video!


by ScegliAuto

More videos